Effect of dairy by-products as milk replacers on quality attributes of ice cream.

The aim of this study was to evaluate the effect of ricotta whey (RW), cheese whey (CW), and butter whey (BUW) as replacers of whole milk (WM) at different ratios (0:100, 25:75, 50:50, 75:25, and 100:0) in the physicochemical and sensory qualities of ice cream. All formulations, including a commercial sample used as reference, were analyzed for nutritional composition, energy value, pH, titratable acidity (TA), melting behavior, desorption index, instrumental color properties, instrumental hardness, and consumer sensory testing. Overall, the addition of RW, CW, and BUW increased the moisture content, TA, melting rate, and redness (a*) and yellowness (b*) values but decreased the pH, lightness (L*) value, energy value, levels of ash, protein, lipid, and carbohydrate. As exception, CW did not influence the TA, and BUW resulted in lower lipid reduction and in lower hardness changes, and it did not affect the content of ash, protein, and a* and b* values of ice creams. Any ice cream formulation had dietary fibers and a desorption index. Ricotta whey and CW at all ratios and BUW at 25% did not affect overall liking compared with the commercial sample, whereas purchase intention was only decreased by the addition of BUW from 50 to 100%. Ricotta whey at 75 and 100% decreased melting velocity and creaminess, and BUW at 50, 75, and 100% increased hardness, TA, and cream flavor but decreased creaminess, which contributed negatively to overall liking. Therefore, the evaluated dairy by-products, especially RW and CW, have great potential for replacing milk in ice creams.

Caracterização físico-química e microbiológica de gelado comestível com a polpa de jaca liofilizada / Physicochemical and microbiological characterization of edible ice cream with jack fruit lyophilized pulp

A liofilização é um método utilizado para a conservação das características nutricionais, protegendo a estrutura primária e contribuindo para preservar componentes como vitaminas e minerais, com redução mínima de volume, bem como manter o sabor e aroma semelhantes ao fruto in natura, como por exemplo a jaca. Diante deste contexto, este estudo almejou aplicar o processo de liofilização nos frutículos de jaca, e desenvolver formulações de sorvete com a polpa. Observou-se que os resultados das análises microbiológicas das formulações de sorvete estavam de acordo com a legislação vigente, e os teores de proteína obtiveram valores de 1,34%, 1,44% e 1,74% respectivamente para as formulações 0%, 7,40% e 19,35% de polpa liofilizada, observando-se que todas as formulações apresentaram resultados fora dos padrões permitidos pela legislação vigente que determina um mínimo de 2,5%. Conclui-se que o processo de elaboração do sorvete atendeu às boas práticas de fabricação, devido à sua inocuidade.

Systemic and skin-targeting beneficial effects of lycopene-enriched ice cream: A pilot study.

The health-promoting dietary antioxidant lycopene has limited natural bioavailability, but lycopene-rich functional foods can improve its bioavailability. We assessed a new lycopene-enriched ice cream for systemic antioxidant effects and influence on morphological characteristics of facial skin surface in healthy volunteers. In a randomized crossover study, we used 4-wk dietary interventions with either control or lycopene-enriched ice cream. Samples of serum and residual skin surface components (RSSC) from facial skin were taken before interventions, at 2 wk, and at intervention end. Lycopene concentration, conventional blood biochemistry, and oxidative stress biomarkers comprising inflammatory oxidative damage and low-density lipoprotein peroxidase proteins were assessed in the serum. Lycopene-associated immunofluorescence, lipid droplet size, corneocyte desquamation, and microbial presence were measured in the RSSC. The results show that lycopene concentrations in the serum and skin steadily increased during lycopene-enriched ice cream consumption. Whereas we found no intervention-dependent changes in conventional biochemical parameters, both inflammatory oxidative damage and low-density lipoprotein peroxidase protein values significantly decreased by the end of intervention with lycopene-enriched ice cream, but remained unchanged during control ice cream consumption. Control ice cream significantly increased corneocyte desquamation and bacterial presence in the RSSC. These adverse effects, which could potentially predispose consumers to acne development, were absent when volunteers consumed lycopene-enriched ice cream. We concluded that lycopene-enriched ice cream is a new functional food with clear antioxidant properties. In addition, enrichment with lycopene may alleviate proinflammatory action of ice cream at the level of facial skin, thus decreasing diet-associated acne development risk in young consumers.

Official controls regarding artisanal ice cream shops: public health policies and consumer protection in the Italian and European legislative frameworks.

Ice cream is a widely enjoyed food that is especially popular during summer. To ensure it is safe and ready-to-eat for consumers, legislation imposes a series of obligations for food business operators, and for competent authorities that have to carry out official controls, including official sampling. This article reviews the general and specific requirements applicable to the premises where ice cream is produced, concerning aspects related to health notification obligations and to implementing and maintaining procedures based on the principles of the Hazard Analysis and Critical Control Point system. The review extends to results stemming from the most recent official control activities conducted in Italy, and to future perspectives on control methods that will have to be compliant with the provisions of the new EU Regulation 625/2017 applicable from 2019.

Assessing the effects of different prebiotic dietary oligosaccharides in sheep milk ice cream.

The objective of this study was to assess the effects of different prebiotic dietary oligosaccharides (inulin, fructo-oligosaccharide, galacto-oligossacaride, short-chain fructo-oligosaccharide, resistant starch, corn dietary oligosaccharide and polydextrose) in non-fat sheep milk ice cream processing through physical parameters, water mobility and thermal analysis. Overall, the fat replacement by dietary prebiotic oligosaccharides significantly decreased the melting time, melting temperature and the fraction and relaxation time for fat and bound water (T22) while increased the white intensity and glass transition temperature. The replacement of sheep milk fat by prebiotics in sheep milk ice cream constitutes an interesting option to enhance nutritional aspects and develop a functional food.

Optimization of fat-reduced ice cream formulation employing inulin as fat replacer via response surface methodology.

The use of new ingredients like inulin for fat replacement is of wide application in the food industry. The aim of the present work was to reduce the fat content on ice cream formulations. It was possible to reduce up to 25% of butyric and vegetable fats with 3% of inulin, with good textural and sensory characteristics of the final product. The substitution of fat with inulin increased the ice cream mix viscosity, improved air incorporation, and produced ice cream with soft and homogeneous textures. Color characteristics were not affected by the replacement. Hedonic sensory analysis showed that optimized fat-reduced inulin ice cream was not perceived different to commercial vanilla ice cream.

Explaining tolerance for bitterness in chocolate ice cream using solid chocolate preferences.

Chocolate ice cream is commonly formulated with higher sugar levels than nonchocolate flavors to compensate for the inherent bitterness of cocoa. Bitterness, however, is an integral part of the complex flavor of chocolate. In light of the global obesity epidemic, many consumers and health professionals are concerned about the levels of added sugars in foods. Once a strategy for balancing undesirable bitterness and health concerns regarding added sugars has been developed, the task becomes determining whether that product will be acceptable to the consumer. Thus, the purpose of this research was to manipulate the bitterness of chocolate ice cream to examine how this influences consumer preferences. The main goal of this study was to estimate group rejection thresholds for bitterness in chocolate ice cream, and to see if solid chocolate preferences (dark vs. milk) generalized to ice cream. A food-safe bitter ingredient, sucrose octaacetate, was added to chocolate ice cream to alter bitterness without disturbing other the sensory qualities of the ice cream samples, including texture. Untrained chocolate ice cream consumers participated in a large-scale sensory test by indicating their preferences for blinded pairs of unspiked and spiked samples, where the spiked sample had increasing levels of the added bitterant. As anticipated, the group containing individuals who prefer milk chocolate had a much lower tolerance for bitterness in their chocolate ice cream compared with the group of individuals who prefer dark chocolate; indeed, the dark chocolate group tolerated almost twice as much added bitterant in the ice cream before indicating a significant preference for the unspiked (control) ice cream. This work demonstrates the successful application of the rejection threshold method to a complex dairy food. Estimating rejection thresholds could prove to be an effective tool for determining acceptable formulations or quality limits when considering attributes that become objectionable at high intensities.

Reduced fat and sugar vanilla ice creams: sensory profiling and external preference mapping.

The aims of this study were (1) to map sensory attributes of vanilla ice cream with reduced fat and sugar, and (2) to determine drivers of liking by applying external preference mapping and reveal the relationship between descriptive attributes and hedonic judgments using the partial least squares method. Descriptive sensory profiles (n=11) and consumer test (n=117) of 6 samples of vanilla ice cream (3 traditional and 3 with reduced fat and sugar) were determined. The attributes brightness and sweet aftertaste for sample and creaminess (appearance and texture) and sweet aroma contributed positively to the acceptance of ice cream samples. The attributes aeration, powdered milk aroma and flavor, and white chocolate aroma and flavor contributed positively to the acceptance of the ice creams. The attributes hydrogenated fat aroma and flavor were responsible for the lower acceptance of samples. The reduction in fat and sugar did not necessarily cause a decrease in acceptance. The most important factors were selection of the appropriate sweetener system and the use of good quality raw material.

The effects of information on willingness to pay for animal welfare in dairy production: application of nonhypothetical valuation mechanisms.

The objective of this study was to examine consumer willingness to pay (WTP) for animal welfare in dairy production using nonhypothetical Vickrey auctions and open-ended choice experiments. Two hundred fifteen subjects participated in experimental sessions with 4 types of dairy products (humane animal care-labeled cheese and ice cream and conventional cheese and ice cream) and 4 valuation mechanisms. Information treatment, which included information about humane animal care principles in dairy production, was used to examine the effects of information on WTP. The results showed that participants, on average, were willing to pay extra for a scoop of humane animal care-labeled ice cream above the price of conventional ice cream. However, no premium WTP for humane animal care-labeled cheese was detected. Furthermore, provision of information only about humane animal care principles in dairy production, without corresponding information about conventional production practices, did not increase WTP for humane animal care-labeled products.

Effect of storage temperature on quality of light and full-fat ice cream.

Ice cream quality is dependent on many factors including storage temperature. Currently, the industry standard for ice cream storage is -28.9 °C. Ice cream production costs may be decreased by increasing the temperature of the storage freezer, thus lowering energy costs. The first objective of this research was to evaluate the effect of 4 storage temperatures on the quality of commercial vanilla-flavored light and full-fat ice cream. Storage temperatures used were -45.6, -26.1, and -23.3 °C for the 3 treatments and -28.9 °C as the control or industry standard. Ice crystal sizes were analyzed by a cold-stage microscope and image analysis at 1, 19.5, and 39 wk of storage. Ice crystal size did not differ among the storage temperatures of light and full-fat ice creams at 19.5 or 39 wk. An increase in ice crystal size was observed between 19.5 and 39 wk for all storage temperatures except -45.6 °C. Coldness intensity, iciness, creaminess, and storage/stale off-flavor of the light and full-fat ice creams were evaluated at 39 wk of storage. Sensory evaluation indicated no difference among the different storage temperatures for light and full-fat ice creams. In a second study, light and full-fat ice creams were heat shocked by storing at -28.9 °C for 35 wk and then alternating between -23.3 and -12.2 °C every 24h for 4 wk. Heat-shocked ice creams were analyzed at 2 and 4 wk of storage for ice crystal size and were evaluated by the sensory panel. A difference in ice crystal size was observed for light and full-fat ice creams during heat-shock storage; however, sensory results indicated no differences. In summary, storage of light or full-fat vanilla-flavored ice creams at the temperatures used within this research did not affect quality of the ice creams. Therefore, ice cream manufacturers could conserve energy by increasing the temperature of freezers from -28.9 to -26.1 °C. Because freezers will typically fluctuate from the set temperature, usage of -26.1 °C allows for a safety factor, even though storage at -23.3 °C did not affect ice cream quality.

Short communication: low-fat ice cream flavor not modified by high hydrostatic pressure treatment of whey protein concentrate.

The purpose of this study was to examine flavor binding of high hydrostatic pressure (HHP)-treated whey protein concentrate (WPC) in a real food system. Fresh Washington State University (WSU, Pullman) WPC, produced by ultrafiltration of separated Cheddar cheese whey, was treated at 300 MPa for 15 min. Commercial WPC 35 powder was reconstituted to equivalent total solids as WSU WPC (8.23%). Six batches of low-fat ice cream were produced: A) HHP-treated WSU WPC without diacetyl; B) and E) WSU WPC with 2 mg/L of diacetyl added before HHP; C) WSU WPC with 2 mg/L of diacetyl added after HHP; D) untreated WSU WPC with 2 mg/L of diacetyl; and F) untreated commercial WPC 35 with 2 mg/L of diacetyl. The solution of WSU WPC or commercial WPC 35 contributed 10% to the mix formulation. Ice creams were produced by using standard ice cream ingredients and processes. Low-fat ice creams containing HHP-treated WSU WPC and untreated WSU WPC were analyzed using headspace-solid phase microextraction-gas chromatography. Sensory evaluation by balanced reference duo-trio test was carried out using 50 untrained panelists in 2 sessions on 2 different days. The headspace-solid phase microextraction-gas chromatography analysis revealed that ice cream containing HHP-treated WSU WPC had almost 3 times the concentration of diacetyl compared with ice cream containing untreated WSU WPC at d 1 of storage. However, diacetyl was not detected in ice creams after 14 d of storage. Eighty percent of panelists were able to distinguish between low-fat ice creams containing untreated WSU WPC with and without diacetyl, confirming panelists' ability to detect diacetyl. However, panelists were not able to distinguish between low-fat ice creams containing untreated and HHP-treated WSU WPC with diacetyl. These results show that WPC diacetyl-binding properties were not enhanced by 300-MPa HHP treatment for 15 min, indicating that HHP may not be suitable for such applications.

Modeling of the effect of freezer conditions on the hardness of ice cream using response surface methodology.

The effect of conventional continuous freezer parameters [mix flow (L/h), overrun (%), drawing temperature ( degrees C), cylinder pressure (kPa), and dasher speed (rpm)] on the hardness of ice cream under varying measured temperatures (-5, -10, and -15 degrees C) was investigated systematically using response surface methodology (central composite face-centered design), and the relationships were expressed as statistical models. The range (maximum and minimum values) of each freezer parameter was set according to the actual capability of the conventional freezer and applicability to the manufacturing process. Hardness was measured using a penetrometer. These models showed that overrun and drawing temperature had significant effects on hardness. The models can be used to optimize freezer conditions to make ice cream of the least possible hardness under the highest overrun (120%) and a drawing temperature of approximately -5.5 degrees C (slightly warmer than the lowest drawing temperature of -6.5 degrees C) within the range of this study. With reference to the structural elements of the ice cream, we suggest that the volume of overrun and ice crystal content, ice crystal size, and fat globule destabilization affect the hardness of ice cream. In addition, the combination of a simple instrumental parameter and response surface methodology allows us to show the relation between freezer conditions and one of the most important properties-hardness-visually and quantitatively on the practical level.

Effect of calcium chloride addition on ice cream structure and quality.

The influence of calcium fortification by the addition of calcium chloride on quality parameters of ice cream based on physical properties was investigated, as was the effect of kappa-carrageenan at modifying the effects of this calcium fortification. Four ice cream mixes of conventional composition, with added kappa-carrageenan (0 or 0.025%) and added calcium chloride (0 or 4.4 g L(-1) = 40 mM of added Ca(2+)), were prepared. Modulated temperature-differential scanning calorimetry was used to investigate the effect of calcium chloride on the nucleation temperature, enthalpy of melting, and freezing point depression. The protein composition of 15.4% (wt/wt) reconstituted skim milk powder solutions with or without 4.4 g L(-1) added CaCl(2) and in the supernatant after ultracentrifugation was determined. Fat particle size distributions in ice cream were characterized by light scattering. Ice crystal sizes before and after temperature cycling were determined by cold-stage light microscopy. The results demonstrated that the addition of calcium chloride led to a substantial increase in ice crystal sizes and in fat partial coalescence, which were exacerbated by the addition of kappa-carrageenan. These results can be explained by the interaction between Ca(2+) ions and casein micelles, rather than any effects on freezing point depression. The calcium ions led to a more compact micelle, less serum beta-casein, and high fat destabilization, all of which would be expected to reduce macromolecular structure and volume occupancy in the unfrozen phase, which led to increased rates of ice recrystallization.

High hydrostatic pressure modification of whey protein concentrate for improved body and texture of lowfat ice cream.

Previous research demonstrated that application of high hydrostatic pressure (HHP), particularly at 300 MPa for 15 min, can enhance foaming properties of whey protein concentrate (WPC). The purpose of this research was to determine the practical impact of HHP-treated WPC on the body and texture of lowfat ice cream. Washington State University (WSU)-WPC was produced by ultrafiltration of fresh separated whey received from the WSU creamery. Commercial whey protein concentrate 35 (WPC 35) powder was reconstituted to equivalent total solids as WSU-WPC (8.23%). Three batches of lowfat ice cream mix were produced to contain WSU-WPC without HHP, WSU-WPC with HHP (300 MPa for 15 min), and WPC 35 without HHP. All lowfat ice cream mixes contained 10% WSU-WPC or WPC 35. Overrun and foam stability of ice cream mixes were determined after whipping for 15 min. Ice creams were produced using standard ice cream ingredients and processing. The hardness of ice creams was determined with a TA-XT2 texture analyzer. Sensory evaluation by balanced reference duo-trio test was carried out using 52 volunteers. The ice cream mix containing HHP-treated WSU-WPC exhibited the greatest overrun and foam stability, confirming the effect of HHP on foaming properties of whey proteins in a complex system. Ice cream containing HHP-treated WSU-WPC exhibited significantly greater hardness than ice cream produced with untreated WSU-WPC or WPC 35. Panelists were able to distinguish between ice cream containing HHP-treated WSU-WPC and ice cream containing untreated WPC 35. Improvements of overrun and foam stability were observed when HHP-treated whey protein was used at a concentration as low as 10% (wt/wt) in ice cream mix. The impact of HHP on the functional properties of whey proteins was more pronounced than the impact on sensory properties.

Effect of fat level on the perception of five flavor chemicals in ice cream with or without fat mimetics by using a descriptive test.

Fat mimetics are commonly used in the manufacture of low-fat and fat-free ice creams. However, the use of fat mimetics affects flavor and texture characteristics of ice cream, which results in decreased overall acceptability by consumers. The initial objective of this study was to investigate the release behavior of 5 strawberry flavor compounds in ice creams with Simplesse((R)), Litesse((R)), and Litesse((R))/Simplesse((R)) mixes using descriptive analysis. Fat mimetics and flavor formulation significantly influenced the perception of Furaneoltrade mark (cooked sugar flavor), alpha-ionone (violet flavor), and gamma-undecalactone (peach flavor), but there was no interaction between ice cream type and flavor formulation for the 3 flavors. Furaneol and ethyl-3-methyl-3-phenylglycidate (candy flavor) were perceived more strongly in full-fat ice cream, while cis-3-hexen-1-ol (grassy flavor), alpha-ionone, and gamma-undecalactone were perceived more strongly in low-fat ice cream. Ice creams with Simplesse and full-fat ice cream had similar sensory characteristics, while ice creams with Litesse were similar to low-fat ice creams in flavor characteristics, and ice creams with Litesse/Simplesse mixes were closer in flavor profile to low-fat ice cream but had similar texture properties to those of full-fat ice cream. Simplesse was found to be a better fat mimetic for duplicating the flavor profiles and mouthfeel of full-fat ice cream.

Evaluation of rice flour for use in vanilla ice cream.

The effects of varying concentrations (2, 4, and 6%) of 2 types of rice flours (RF 1 and RF 2) on the physicochemical properties and sensory characteristics of vanilla ice cream samples were assessed at different fat levels (0, 4, and 10%) and storage conditions (control vs. heat-shocked). Fat and total solids were measured as well as hardness, viscosity, and melting rate. Eight trained panelists conducted descriptive sensory analyses of the samples at 0 and 7 wk. The 2% rice flour level and to a certain extent the 4% usage level generally improved texture while affecting to a lesser extent the flavor characteristics of the samples compared with the control. The RF 2 generally had a more significant effect than RF 1, especially on the texture attributes. Although the rice flour reduced the negative impact of temperature abuse on textural properties, the samples still deteriorated in textural properties (more icy) under temperature abuse conditions. In addition, rice starch does lower perceived sweetness and can have a "flour flavor" at high usage levels. The use of rice flour appears to be most advantageous for low fat ice cream samples.

Aflatoxin M1 contamination of milk and ice cream in Abeokuta and Odeda local governments of Ogun State, Nigeria.

A survey was undertaken to determine the aflatoxin M(1) contamination of milk and some locally produced dairy products in Abeokuta and Odeda local governments of Ogun State, Nigeria. Samples of human and cow milk, yoghurt, "wara", ice cream and "nono" were collected randomly within the local governments and analysed for aflatoxin M(1) using the two-dimensional TLC. Aflatoxin M(1) contamination in the range of 2.04-4.00 microg l(-1) was noticed only in milk and ice cream. In particular, samples of human milk, cow milk and ice cream recorded high scores of 4.0 microg l(-1), 2.04 microg l(-1) and 2.23 microg l(-1), respectively in Abeokuta local governments and a score of 4.0 microg l(-1) for cow milk in Odeda local government. This indicates a high level contamination in the local governments since the weighted mean concentration of aflatoxin M1 in milk for African diet is 0.002 microg l(-1). Therefore the concentration of AFB1 in feeds which is transformed to AFM1 in milk should be reduced by good manufacturing and good storage practices. Furthermore, there is need for stringent quality control during processing and distribution of these products.

Oxidation and textural characteristics of butter and ice cream with modified fatty acid profiles.

The primary objective of this study was to evaluate oxidation and firmness of butter and ice cream made with modified milkfat containing enhanced amounts of linoleic acid or oleic acid. The influence of the fatty acid profile of the HO milkfat relating to product properties as compared with the influence the fatty acid profile of the HL milkfat was the main focus of the research. Altering the degree of unsaturation in milkfat may affect melting characteristics and oxidation rates, leading to quality issues in dairy products. Three milkfat compositions (high-oleic, high-linoleic, and control) were obtained by modifying the diets of Holstein cows. Ice cream and butter were processed from milkfat obtained from cows in each dietary group. Butter and ice cream samples were analyzed to determine fatty acid profile and firmness. High-oleic milkfat resulted in a softer butter. Solid fat index of high-oleic and high-linoleic milkfat was lower than the control. Control ice cream mix had higher viscosity compared with high-oleic and high-linoleic, but firmness of all ice creams was similar when measured between -17 and -13 degrees C. Nutritional and textural properties of butter and ice cream can be improved by modifying the diets of cows.

Effect of biopolymers on structure and ice recrystallization in dynamically frozen ice cream model systems.

Ice crystal growth and microstructure of sugarsolutions prepared with stabilizers (carboxymethyl cellulose [CMC], xanthan gum, locust bean gum [LBG], and gelatin) with or without milk solids-nonfat (MSNF) after freezing in a scraped surface heat exchanger and temperature cycling (5 cycles from -6 degrees C to -20 degrees C) were studied. Ice crystal growth was calculated from brightfield microscopic images acquired from samples before and after cycling. Freeze-substitution and low-temperature embedding (LR-Gold resin) were sample preparation techniques utilized for structure analyses by light microscopy and transmission electron microscopy. Differential staining for carbohydrates and proteins allowed the identification of stabilizer gel-like structures in LBG, gelatin, and gelatin/MSNF solutions. In the absence of milk proteins, xanthan and LBG were the most effective at retarding recrystallization, while in their presence, only xanthan had an effect. Cryo-gelation of the LBG was observed but is not the only mechanism of stabilizer action. Thermodynamic incompatibility between biopolymers was observed to promote localized high concentrations of milk proteins located at the ice crystal interface, probably exerting a water-holding action that significantly enhanced the stabilizer effect. Qualitatively, solution heterogeneity (phase separation) was directly proportional to ice crystal growth inhibition. It is suggested that water-holding by stabilizer and proteins, and in some cases steric hindrance induced by a stabilizer gel-like network, caused a reduction in the kinetics of the ice recrystallization phenomena and promoted mechanisms of melt-regrow instead of melt-diffuse-grow recrystallization, thus resulting in the preservation of the ice crystal size and in a small span of the ice crystal size distribution.

Effect of double homogenization and whey protein concentrate on the texture of ice cream.

Ice cream samples were made with a mix composition of 11% milk fat, 11% milk solids-not-fat, 13% sucrose, 3% corn syrup solids (36 dextrose equivalent), 0.28% stabilizer blend, or 0.10% emulsifier and vanilla extract. Mixes were high temperature short time pasteurized at 80 degrees C for 25 s, homogenized at 141 kg/cm2 pressure on the first stage and 35 kg/cm2 pressure on the second, and cooled to 3 degrees C. The study included six treatments from four batches of mix. Mix from batch one contained 0.10% emulsifier. Half of this batch (treatment 1), was subsequently frozen and the other half (upon exiting the pasteurizer) was reheated to 60 degrees C, rehomogenized at 141 kg/cm2 pressure on the first stage and 35 kg/cm2 pressure on the second (treatment 2), and cooled to 3 degrees C. Mix from batch two contained 0.28% stabilizer blend. Half of this batch was used as the control (treatment 3), the other half upon exiting the pasteurizer was reheated to 60 degrees C, rehomogenized at 141 kg/cm2 pressure on the first stage and 35 kg/cm2 pressure on the second (treatment 4), and cooled to 3 degrees C. Batch three, containing 0.10% emulsifier and 1% whey protein concentrate substituted for 1% nonfat dry milk, upon exiting the pasteurizer was reheated to 60 degrees C, rehomogenized at 141 kg/cm2 pressure on the first stage and 35 kg/cm2 pressure on the second (treatment 5), and cooled to 3 degrees C. Batch four, containing 0.28% stabilizer blend and 1% whey protein concentrate substituted for 1% nonfat dry milk, upon exiting the pasteurizer was reheated to 60 degrees C, rehomogenized at 141 kg/ cm2 pressure on the first stage and 35 kg/cm2 pressure on the second (treatment 6), and cooled to 3 degrees C. Consistency was measured by flow time through a pipette. Flow time of treatment 3 was greater than all treatments, and the flow times of treatments 4 and 6 were greater than treatments 1, 2, and 5. Flow time was increased in ice cream mix by the addition of stabilizer. Double homogenization lowered ice cream mix flow time in the presence of stabilizer, but no difference in flow time was observed without stabilizer addition. Treatment 4 had a lower mean ice crystal size at 10 d postmanufacture compared with treatment 3; however, overall texture acceptability between treatments 3 and 4 was similar. Mean ice crystal size of treatment 6 was less at 18 wk postmanufacture compared with treatment 3; however, overall texture acceptability for treatments 3, 4, and 6 was similar. Mean ice crystal sizes of treatments 1, 2, and 5 were greater at 10 d and 18 wk compared with treatment 3. Sensory evaluation indicated that treatments 3, 4, and 6 had higher mean scores for icy, coldness intensity, and creaminess than treatments 1, 2, and 5 at 10 d and 18 wk postmanufacture.